Faucet Installation - Kohler K-10950 Mode D'emploi

Without Escutcheon
Spout
Supply
Hoses
Studs
O-Ring
Bracket
Nut

2. Faucet Installation

Slide the O-ring over the flex hoses and studs, and attach it to the
groove in the base of the spout.
If installing the optional escutcheon: Thread the supplied studs
into the holes in the bottom of the escutcheon. Carefully slide the
escutcheon and gasket over the flex hoses and stud(s) up to the
base of the spout.
Run the flex hose and studs through the mounting hole from
above.
Slide the bracket onto the stud(s). If a single stud configuration is
being used, slide the stud through the middle hole in the bracket.
Thread the supplied nut(s) onto the faucet stud(s).
For escutcheon installations: Slide the channel brackets and
spacers onto the escutcheon studs. Thread the nuts onto the studs
to secure.
Tighten all nuts securely. Do not overtighten.
Kohler Co.
With Escutcheon
O-Ring
Supply
Hoses
Stud
Bracket
5
Spout
Studs
Escutcheon
Gasket
Channel
Bracket
Spacer
Nut
Nut
1025498-2-E