Control With Vario Footpedal; Printing (Optional) - Nouvag MD 20 Mode D'emploi

MD20
6.9.

Control with vario footpedal

1) Carrying handle
2) Pump key :
Brief key stroke: switch pump on or off (see display).
Long key stroke: increase pump speed (see display).
3) Programme key :
Brief key stroke: switch over programme (+1)
(see display)
Long key stroke: switch over programme (-1)
(see display)
4) Motor key :
Brief key stroke: switch over direction of rotation (see display)
Long key stroke: switch motor (see also motor jacks control lamps on the control unit)
5) Step:
With the footpedal step, the pump process can be activated and the variable rotational speed of the
motor can be controlled:
Step ...
... not pressed
... slightly pressed down
... completely pressed
down
•
With the selected fixed keys, the speeds cannot be altered.
•
For safety reasons, the device can only be operated with the footpedal.

6.10. Printing (optional)

Connect only the optional printer DPT100-S to the interface RS232 (Printer not
supplied!).
The operations can be printed out with the help of the connected printer:
Press „print" key on the control panel → print menu appears:
12
All manuals and user guides at all-guides.com
Motor:
Motor off
Motor runs slowly
Motor runs at maximum speed
(rotational speed adjusted like at
control device)
Print out data: ............ brief stroke on „print" key
Delete data: ................long stroke on „print" key
NOUVAG AG
2
5
Pump:
Pump off
Pump on, in case „On" on the
display (rotational speed
adjusted like at control device)
Pump on, in case „On" on the
display (rotational speed
adjusted like at control device)
No. 31842 14/06
1
3
4