Step 1) Adjustment Of The Transmission; Step 2) Adjustment Of The Rotational Speed - Nouvag MD 20 Mode D'emploi

NOUVAG AG
6.5.1.

Step 1) Adjustment of the transmission

The relevant transmission ratio must be selected according to the kind of workpiece coupled to the
motor. The speed showed on the display and the torque agree with the actual parameters only in that
case.
Adjusting the transmission ratio:
1) Press "Handpiece" key „-" or „+" → Transmission selection menu appears:
2) With„-" or„+" select desired transmission ratio:
• Reductions:
• Fixed keys:
• Transmissions:
• Rotational speed (not adjustable): Displays the rotational speed range corresponding to the
3) No longer activate "Handpiece" keys „-" and „+" → after approx. 2s the display jumps back into
normal representation.
→ In normal representation, the selected mode now appears on the top left.
6.5.2.

Step 2) Adjustment of the rotational speed

The desired rotational speed can be selected from the relevant rotational speed range:
Transmission ratio:
Adjusting the rotational speed:
1) Press "Speed" key „-" or „+" → Rotational speed selection menu appears:
No. 31842 14/06
All manuals and user guides at all-guides.com
1:1, 16:1, 20:1, 32:1
Comp.saw (Fixed setting for compass saws)
Osc.Saw (fixed setting for oscillating saws)
Sag.Saw (fixed setting for sagittal saws)
Mucotom (fixed setting for Mucotom)
1:5, 1:3
transmission ratio.
1:1 .................500 – 40'000
16:1 ...............30 – 2'500
20:1 ...............25 – 2'000
32:1 ...............15 – 1'250
Comp.Saw.....15'000
Osc.Saw ........15'000
Sag.Saw ........15'000
Mucotom .......8'000
1:5 .................2'500 – 200'000
1:3 .................1'500 – 120'000
MD20
: rotational speed[rpm]
9