Bosch MUM59 Serie Mode D'emploi page 22

en
Operation
Predetermined breaking point
Figure G:
The built­in predetermined breaking point
protects the drive of the appliance. If an
overload occurs, the drive shaft of the
continuous­feed shredder breaks. However,
the drive shaft can easily be replaced.
A new disc holder with drive shaft is
available from customer service.
Professional Supercut
reversible disc – coarse / fine
for slicing fruit and vegetables.
Process at setting 5.
Designation on the reversible slicing disc:
"Grob" for the coarse cutting side
"Fein" for the fine cutting side
Warning!
The reversible slicing disc is not suitable
for slicing hard cheese, bread, rolls or
chocolate. Slice boiled, waxy potatoes only
when they are cold.
Reversible shredding disc –
coarse / fine
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
Process at setting 3 or 4.
Designation on the reversible shredding
disc:
"2" for the coarse shredding side
"4" for the fine shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only at setting 7.
Grating disc – medium-fine
for grating raw potatoes, hard
cheese (e.g. Parmesan), cooled
chocolate and nuts.
Process at setting 7.
Warning!
The grating disc is not suitable for grating
soft cheese and cheese slices.
22
All manuals and user guides at all-guides.com
Potato fritter disc
For grating raw potatoes for
rostis and potato fritters, for cutting
fruit and v egetables into thick slices.
Grating: Process at setting 7.
Cutting: Process at setting 5.
Working with the continuous-
feed shredder
Figure H:
■ Press the Release button and
■ Insert the bowl:
■ Press the Release button and
■ Remove drive cover from the drive of the
■ Hold disc holder at the lower end,
■ Carefully place the required slicing or
■ Grip disc holder at the upper end and
■ Attach the cover (note mark) and turn all
■ Place continuous­feed shredder on the
■ Turn rotary switch to recommended
■ Put food to be processed in the feed tube
W Warning!
Prevent the cut ingredients from building up
in the outlet opening.
Tip: To ensure even cutting results, process
thin ingredients in bunches.
move the swivel arm to
position 2.
Tilt the bowl forwards and then set it
down. Turn anti­clockwise until it locks
into place.
move the swivel arm to
position 3.
continuous­feed shredder (Figure H-5a).
ensuring that the two tips are face up.
shredding disc onto the tips of the disc
holder (Figure H-6a). In the case of
reversible discs, ensure that the required
side is face up.
insert into the housing (Figure H-6b).
the way in a clockwise direction.
drive and rotate all the way in a clockwise
direction, as illustrated in Figure H-8.
setting.
and push down with the pusher.