Chest Clip; Harness Buckle - Britax Advocate CS Guide De L'utilisateur

Child Seat Functions

Chest Clip

Fastening the Chest Clip
Fasten the chest clip by pushing the two halves
together until a click is heard (Fig. A).
Releasing the Chest Clip
1 Squeeze the middle tabs together (Fig. B).
2 Pull the two pieces apart.
Adjusting the Chest Clip
1 Slide the chest clip up or down on the
harness so it is positioned at the middle
of the child's chest, level with the child's
armpits (Fig. C).
2 Slide the HUGS chest pads and comfort
™
pads to a comfortable location for the child.
HUGS™ Chest Pads
WARNING! HUGS
™
be installed for forward-facing use. Removal of
HUGS is optional only for rear-facing use.
34
All manuals and user guides at all-guides.com
a
b
chest pads must
c

Harness Buckle

Fastening the Harness Buckle
1 Hold the harness buckle with one hand.
2 Use your other hand to insert one buckle
tongue at a time into the harness buckle
(Fig. D).
• A proper connection is confirmed with an
audible click after inserting each buckle
tongue.
Releasing the Harness Buckle
1 Brace the rear of the harness buckle with
one hand.
2 Use your thumb to press the release button
and slide both buckle tongues to remove
from the buckle (Fig. E).
IMPORTANT: Periodically clean the harness
buckle to ensure safe operation. See page 41.
Child Seat Functions
d
e
35