DS Produkte Z 07213 Mode D'emploi page 13

• Never touch the device, the mains cord and the mains plug with
wet hands when these components are connected to the mains
supply.
• Turn the device off and pull the mains plug out of the socket
– if you are not using the device,
– if a fault occurs during operation,
– before a storm,
– before you clean and/or stow the device.
• Always pull on the plug itself and never on the mains cord!
• Only use the device in enclosed areas.
• Do not use the device in rooms containing easily fl ammable
dust or toxic and explosive vapours.
• Do not operate the device in very moist environment or in the
vicinity of fl ammable material.
• Only use the device once it has been properly assembled and
the device, the mains cord or the mains plug does not exhibit
any visible damages. Do not use the device if it malfunctions,
has fallen down or in water.
• Only use the enclosed accessories from the manufacturer.
• For your own safety, always check the device for damages prior
to using it. Only use the device if the device, mains cord and the
plug do not exhibit any damages!
• Never leave the device unattended when it is switched on or
plugged in to the mains supply. Pull the mains plug in case of
longer breaks.
• Do not make any modifi cations to the device. Also do not re-
place the mains cord yourself. Only have the device, cord and
plug repaired by a qualifi ed workshop. Contact customer ser-
vice if necessary. Improper repairs could pose serious risks for
the user.
• Before assembling, disassembling or cleaning the device, it
must always be disconnected from the power supply.
• After cleaning all parts must be dry before the device can be
connected to the mains.
All manuals and user guides at all-guides.com
13 GB