Use - SATA paint set 10 Mode D'emploi

Operating instructions SATA paint set 10, SATA FDG 24, SATA FDG 48
All manuals and user guides at all-guides.com
• The following applications and operations lead to the loss
of the explosion protection and are, therefore, prohibited:
• Use of the paint pressure tank in explosive areas belonging to Ex-
Zone 0!
• Use of solvents and cleaning agents based on halogenised hydrocar-
bons! Chemical reactions which may occur when using these sub-
stances could be explosive!

7. Use

• Use only solvent-resistant, anti-static, undamaged and technically
flawless hoses and pipes for compressed air and paint media with a
pressure fatigue resistance of minimum 10 bar!
7.1. Setting-up of the Paint Pressure Tank
Please observe the following instructions when setting up, operat-
ing and using the paint pressure tank:
• The paint pressure tank can only be operated if in a stable position!
• Exposure to risks of employees or third parties must be prevented by
all means!
• The paint pressure tank must be protected against interference of
third parties!
• The explosion protection required in the work area must be observed!
• The paint pressure tank must be protected against mechanical shock-
loads!
• The type plate must be clearly legible. Paint pressure tanks must
only be operated within the range of parameters indicated
on the type plate (e.g. pressure, temperature)!
Warning! Risk of explosion!
Warning! Risk of explosion!
Warning! Attention!
EN
27