Rear Spacers; Door Reversibility - AEG S73401CNS1 Notice D'utilisation

All manuals and user guides at all-guides.com

8.4 Rear spacers

4
8.5 Levelling

8.6 Door reversibility

A
E
C
2
1
3
B
F
D
You can find the two spacers in the bag
with documentation.
Do these steps to install the spacers:
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
When placing the appliance ensure that
it stands level. This can be achieved by
two adjustable feet at the bottom in
front.
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
• Remove the spacer (A) and move to
the other side of the hinge pivot (B).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C,D) and move to the
other side.
• Fit the pin of the middle hinge (B) into
the left-hand hole of the lower door.
ENGLISH
33