Installation; Positioning; Rear Spacers - AEG S26KA78 Notice D'utilisation

Installation

WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the ap-
pliance before installing the appliance.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance:
Climate class
SN
N
ST
T

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown
in the figure.
1. Fit the spacers into the holes. Make sure
that the arrow (A) is positioned as shown
in the picture.
2. Turn counter-clockwise the spacers
through 45° until they lock into place.
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Ambient temperature
45˚
11
Installation
A