Technical Data; Installation; Rear Spacers - AEG AGS1600 Notice D'utilisation

66 www.aeg.com

9. TECHNICAL DATA

Dimension
Rising Time
Voltage
Frequency
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.

10. INSTALLATION

WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
10.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar)
also, but for optimum performance in-
stall this appliance at a location where
the ambient temperature corresponds to

10.2 Rear spacers

Height
Width
Depth
2
1
45°
A
45°
2
1250 mm
545 mm
640 mm
18 h
230 V
50 Hz
the climate class indicated on the rating
plate of the appliance:
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
In the bag with the documentation,
there are two spacers which must be fit-
ted as shown in the figure.
1. Fit the spacers into the holes. Make
sure that the arrow (A) is positioned
as shown in the picture
2. Turn counter-clockwise the spacers
through 45° until they lock into
place.