Replacing The Lamp; Closing The Door; Technical Data; Installation - AEG S83800KMW0 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The lamp does not work.
Door interferes with venti-
lation grill.
Misaligned door.
As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the lighting device. Contact your Service Center .

Closing the door

1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "Installation".
3.
If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension
Voltage
Frequency
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.

INSTALLATION

WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the appli-
ance before installing the appliance.
All manuals and user guides at all-guides.com
Possible cause
The mains plug is not connected
to the mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket.
The lamp is defective.
The door has been open to long.
The appliance is not levelled.
The appliance is not levelled.
Height
Width
Depth
Technical data
Solution
Connect the mains plug to the
mains socket correctly.
Connect a another electrical ap-
pliance to the mains socket.
Check fuse. Contact a qualified
electrician.
Refer to "Replacing the lamp".
Close the door.
Refer to "Levelling".
Refer to "Levelling".
1800 mm
595 mm
623 mm
230 V
50 Hz
41

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

S83800kmb0S83800kmx0

Table des Matières