Gima ECG90A Notice D'utilisation page 61

61
1 Click
2 Click to save the current settings and exit this interface into
the main menu, click
3 BackLight: select "OFF" and confirm it, the back light will close and device will enter
the power-save mode. Then press any a key on the panel to open the back light.
4 Power alarm: when it is enabled, system can alarm every 10s when the charge of
battery is less than 5% without AC power source.
5 Key voice: when it is enabled, key can make sound after device is started.
Otherwise it is the silence mode.
6 Language: can select Chinese or English.
7 Info input: when it is enabled, you have to enter the interface "Set Patient" as Fig.13-
3-4 before print or save.
Keyboard
1) Switch setting information by [UP] [DOWN] on the panel.
2) Select the item you want to set, then touch the keyboard on the screen or press
[Confirm] on the panel and move focus to the keyboard to set current information.
Click
3) Click
Attention:
a) you can click directly or press [LEFT] [RIGHT] to set sex without keyboard.
b) the length of name is no more than 3.
c) age <200.
d) weight(kg)<200
8 USB-mode
1) This item is disabled when USB is not connected as Fig.13-3-2.
2) This item is enabled when USB is connected. "Store" or "Sync" can be selected.
All manuals and user guides at all-guides.com
or press [UP] [DOWN] to turn page up and down.
to exit without save.
to delete the input. Click
to save the setting and print. Click
ENGLISH
Fig. 13-3-4
to confirm your setting.
to print without save.