Troubleshooting Guide - EINHELL GE-CR 18/20 Li E Instructions D'origine

11. Troubleshooting guide

Fault
The cultivator blades
do not rotate
The cultivator blades
do not work satisfac-
torily
Anl_GE_CR_18_20_Li_E_SPK13.indb 23 Anl_GE_CR_18_20_Li_E_SPK13.indb 23
GB
Possible cause
a) The battery is empty
b) The battery is too cold
c) The battery is not correctly in-
serted
d) Insuffi cient contact or no con-
tact between the long handle
and the long handle fastener
a) The soil is too hard or stony
b) The cultivator blades are heavily
soiled
c) The cultivator blades are worn
- 23 -
Remedy
a) Replace with a full battery
b) Replace with a battery at room tem-
perature
c) Remove the battery and reinsert (sec-
tion 5.3)
d) Open the long handle connection,
remove the long handle and check the
contacts Refasten the long handle.
(Section 5.1)
a) The soil is unsuitable
b) Clean the cultivator blades
c) Replace the cultivator blades
09.11.2021 15:13:41 09.11.2021 15:13:41