Error Table - Inventum VDW9001B Mode D'emploi

ERROR TABLE

In case of an error or fault, the programme will be interrupted.
Flashing signal lights and an acoustic signal will warn about such an occurrence, and the error will
be indicated on the display (E:XX).
Warning Indication on the display
unit and description
of warning
E0 Control panel failure
E1 Temperature sensor
failure
E2 Communication error
E3 Pump error
E4 System overheating
E6, E7, E8 Control panel failure
Write down the error code (e.g. E0, E1), switch off the dryer, and call the customer service.
54
• English
What to do?
Call customer service.
Call customer service.
Call customer service.
Call customer service.
Clean the filter. See chapter »CLEANING
AND MAINTENANCE/Cleaning the dryer filter«
or call a service technician.
Disconnect the tumble dryer from the power
supply.Call customer service.