Adjusting The Settings - Inventum VDW9001B Mode D'emploi

ADJUSTING THE SETTINGS

Most programmes feature basic settings, but these settings can be changed.
Adjust the settings by pressing the relevant function button (before pressing the Start/Pause
button).
Functions that cannot be changed with the selected programme are partly lit (dimmed).
Certain settings cannot be selected with some programmes. Such settings will not be lit,
and the button will flash when pressed.
Description of lighting of functions for the selected programme:
Lit (Basic/pre-set setting)
•
Dimmed (Functions that can be adjusted)
•
Unlit (Functions that cannot be selected)
•
DRYING MODE
EXTRA DRY [extra droog]
Press EXTRA DRY to adjust the dryness level –
the dryer the laundry, the longer the drying
cycle. This setting can be adjusted before the
start of the drying process. After the drying
programme, this setting is not stored.
HALFLOAD [halve belading]
Press HALFLOAD [halve belading] to choose between normal and half load, which also affects
the displayed laundry drying time.
ANTI CREASE [anti-kreuk]
If you do not intend or cannot remove the laundry from the dryer immediately after the
completion of the drying programme, we recommend using the ANTI CREASE function which
has to be selected before the start of the drying process.
Press on ANTI CREASE [anti-kreuk] to choose between 1h, 2h, and 3h or to deactivate this
function. When you open the dryer door after the completion of the drying programme, the
function is automatically deactivated.
60 mm
7,57 mm
Pantone 877C
halve
belading
extra droog
Pantone Cool Gray 2C
LED screen
Pantone 207C
startuitstel anti-kreuk
English
45
•