Before First Use - Inventum VDW9001B Mode D'emploi

4
operation

BEFORE FIRST USE

WARNING!
After installation, let the dryer rest still for 24 hours before using it. Failure to do so may
result in a heat pump failure which shall not be covered by the warranty.
If the dryer has to be laid down on one of its sides during transport or servicing, place it with
its left side downwards, as seen from the appliance front.
CAUTION! Before first use, clean the inside of the drum with a soft damp cloth.
• Put some clean rags into the drum.
• During drying, the airflow and the pump will generate some noise, which is entirely normal.
BEFORE EACH DRYING CYCLE
1. Before each drying cycle, sort your laundry by reading the care labels.
2. Thoroughly spinning the laundry in the washing machine, shortens the drying time and
saves energy.
3. For uniform drying results, sort the laundry according to fabric type and select the
appropriate drying programme.
4. Before drying, please close buttons and zips, hooks and eyelets, tie any ribbons and turn the
pockets inside out.
5. Leave jackets open and undo any long zips so that textiles dry evenly.
6. Sew in or remove underwiring from bras.
7. Close duvet covers and pillow cases to prevent small items from getting rolled up inside them.
8. Drying laundry made of particularly delicate fabrics that may be deformed is not
recommended. The following types of laundry may not be dried in the appliance as this may
cause your garments to deform:
• leather garments and other leather products;
• garments that are waxed or treated in any other way;
• garments with major wooden, plastic or metal parts;
• garments with spangles;
• garments with metal parts subject to rusting.
9. Do not over-dry the clothes, because over-dried clothes can easily get creases.
CAUTION!
• Do not put more load than rated in the appliance.
• See below for the reference weight of dry clothes (weight per item) Do not dry dripping
wet laundry. The appliance might get damaged.
39
English •