Control Panel - Inventum VDW9001B Mode D'emploi

CONTROL PANEL

(1)
(1) ON/OFF BUTTON. Press the On/Off button to start the appliance or to turn it off.
(2) PROGRAMME SELECTOR KNOB. Turn the programme selector knob left or right to select
the desired programme.
(3) START/PAUSE BUTTON. Press this button to start or pause the drying process. Opening
the door also pauses the appliance. When closing the door, press the button again to
resume the drying process.
(4) EXTRA DRY [extra droog]. The extra dry option allows you to adjust the dryness level of
the laundry. The symbol
(5) HALFLOAD [halve belading]. The symbol
(6) CHILD LOCK. The symbol
[startuitstel] together and hold them for 3 seconds to activate or deactivate child lock.
(7) START DELAY [startuitstel]. Option to set a start delay. Use this function to start the
drying cycle after a certain amount of time has elapsed.
(8) ANTI CREASE [anti-kreuk]. The symbol
ADDITIONAL DISPLAY SYMBOLS
42
• English
(2)
lights up when the function is selected.
lights up. Press EXTRA DRY [extra droog] and START DELAY
Information on the START DELAY function.
The display also shows the settings, estimated time remaining,
options and status messages for your appliance. The display will
remain on during the cycle.
Warning: when this indicator lights up, the dryer filter needs to be
cleaned.
Warning: when this indicator lights up, the condensate tank is full and
needs to be emptied.
Pantone 877C
(5)
halve
belading
extra droog
(3) (4) (6)
Pantone Cool Gray 2C
LED screen
lights up when the function is selected.
and anti-crease time chosen will light up.
Pantone 207C
startuitstel anti-kreuk
(7) (8)