Inventum VDW9001B Mode D'emploi page 50

Press START DELAY [startuitstel] to confirm the desired functions and their settings;
press EXTRA DRY [extra droog] to go back one step.
Acoustic signal volume can be set at four levels
• 0 means the sound is off;
• 1 means that the button sound is activated;
• 2 means low volume, and
• 3 means high volume.
Choose the volume level by rotating the programme selector knob (2) to the left or to the right.
The lowest setting means that the acoustic signal is switched off.
LOW STANDBY MODE
If you do not run a programme or do anything else after switching on the dryer, the dryer will
switch off automatically after 5 minutes to save energy. Indicator light on the Start/Pause button
will flash.
The display will be reactivated if you rotate the programme selector knob or press the
On/Off button or open the dryer door. If you do not do anything for 5 minutes after the end
of the programme, the display unit will be switched off as well. The indicator light on the
Start/Pause button will flash.
ERRORS
In case of an error or fault, the programme will be interrupted.
Flashing signal lights and an acoustic signal will warn about such an occurrence (see the chapter
»TROUBLESHOOTING«), and the error will be indicated on the display (E:XX).
50
• English