Inventum VDW9001B Mode D'emploi page 48

STARTING THE DRYING PROGRAMME
Press the Start/Pause button to start the drying
programme with the options chosen.
PAUSING THE DRYING PROGRAMME / ADDING/REMOVING
LAUNDRY / OPENING THE DOOR
The drying programme can always be paused and resumed by pressing the Start/
Pause button or opening the door. The drying programme is temporarily paused.
Add or remove laundry if you wish to do so. Drying time may be extended if you add
laundry.
To resume the drying program, first close the door and then press the Start/Pause
button.
WARNING: The dryer door will heat up during the drying process. Make sure you do
not burn yourself when opening the dryer door.
CANCELLING THE DRYING PROGRAMME
To stop and cancel the drying programme, press the Start/Pause button and hold it
for 3 seconds. The selected programme will stop, and the dryer will start to cool down.
Cooling down time depends on the selected programme. After this process, the drying
programme can be selected again.
CHANGING THE PROGRAMME/FUNCTIONS
Switch off the dryer by pressing the On/Off button; then, switch it on again by pressing
the On/Off button and rotate the programme selector knob to the desired programme,
or choose extra functions.
Select another programme/function and press the Start/Pause button again.
FULL CONDENSATE TANK
When the condensate tank is full, the drying programme will pause and the symbol
Empty the condensate tank (see chapter »MAINTENANCE AND CLEANING/Emptying the
condensate tank«).
Press the Start/Pause button to resume the drying programme from the point at which it was
interrupted.
48
• English
will light.