Led Colour Variations; Ball Nozzle(S) - BADU JET Perla Traduction Du Instruction D'utilisation Originale

6.2.3

LED colour variations

The LED colour variations can be changed by pressing the button
(2) repeatedly within five seconds.
Colour sequence:
• Red
• Green
• Blue
• Green – Red
• Green – Blue
• Red – Blue
• Green – Red –
Blue
The colour variation will be maintained when pressed for longer
than five sceonds.
6.2.4

Ball nozzle(s)

The direction of the ball nozzle(s) (54) can be adjusted. The
nozzles should normally be set horizontally or pointing slightly
upwards. This provides the greatest effect for swimming against
the current.
6.2.5 Air regulator
The air regulator (2/1) allows air to be added to the water jet so
that an air bubble bath effect can be attained. The amount of air
can be adjusted.
6.2.6 Optional accessories
– Attachable massage nozzle
– Massage hose (with pulsator)
– Attachable pulsator
– Wireless control
6.2.7 Do not stand on the cover
NOTICE
Damage to the cover.
 Do not stand on or load the cover.
 Do not use the cover as a starting block.
10|2020
Commissioning/Decommissioning
Change of colour:
• one second discrete
• 30 seconds slowly dimming
• flashing
• seven seconds dimming
• flickering "rolling out"
EN 31