Usage Precautions - Panasonic WX-SE200DNP Mode D'emploi

Usage precautions

Other than the aforementioned "Precautions", make sure to follow the points below.
This product is a professional equipment
This product is intended for indoor use only
● It cannot be used outdoors.
Avoid exposing the product to direct sunlight for extended periods of time, and do not
install it near air conditioners or heaters. Failing to do so may lead to damage to the
shape and color of the product, and may cause it to malfunction. Also avoid exposure to
water droplets and bubbles.
Use this product with care
● This product contains delicate components which may be damaged by improper use or
storage.
● Repair or replace any damaged components.
The operating temperature range is
● Between 0 °C (32 °F) and 45 °C (113 °F). Using the product outside of this range may
cause it to malfunction or to be damaged.
The power switch
● Turning the [POWER] switch to the OFF position will turn the extension receiver OFF,
but it will not interrupt the flow of current. (The [POWER] indicator being off does not
necessarily mean that there is no power going through the extension receiver.) Remove
the power cord from the power outlet to completely break off the flow of current to the
extension receiver.
Power
● The extension receiver uses AC 120 V (60 Hz) power. Connect the extension receiver to
an enough capacity power source.
● Connect the power cord to the power source in one of the following ways.
• Install the extension receiver near the electric outlet, allowing for easy access to the
power plug.
• Connect it to a breaker panel with at least 3.0 mm (1/8 inches) of space between
contacts. Use a breaker which can cut off power from all poles except the protective
ground connection.
Microphone remaining battery level indication
● When the distance between the microphone and the antenna is too far, the signal
reception becomes unstable so that microphone remaining battery level may not be
obtained. Keep the proper distance to ensure a stable wireless connection when using
the remaining battery level indication function. Refer to the receiver manual for
information about the distance (wireless reach) from the microphones to the antenna.
12
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb 12 2022/04/27 13:19:20