Installing In A Rack - Panasonic WX-SE200DNP Mode D'emploi

■ Installing in a rack

The extension receiver can be installed within a rack.
Use one of the following racks (sold separately) for installation.
EIA-standard product: EIA 19-inch rack, at least 450 mm (17-5/8 inches) long
1
Remove the rubber feet (x4) on the bottom of the extension receiver
2
Use the included rack-bracket screws (x4) to attach the rackmount
brackets to both sides of the extension receiver
● Rack-bracket screws torque: 0.88 N•m to 1.08 N•m (9.0 kgf•cm to 11.0 kgf•cm)
Rackmount bracket
(Both sides)
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb
Rubber feet
19
Rack-bracket
screws
x4
19
2022/04/27 13:19:21