Precautions - Panasonic WX-SE200DNP Mode D'emploi

Precautions

Entrust building operations to a retailer
The building operations needed to install this product require skill and experience. There is
a risk of fires, electric shocks, injuries, and damage to property.
● Always ask a retailer to do this.
Not suitable for use in locations where children are likely to be present
For information about screws and other parts required for installation, refer
to the corresponding section of this document
Plug the power plug all the way in
An improperly plugged power plug may lead to electric shocks, overheating, and fires.
● Do not use damaged power plugs or loose power sockets.
Directly grab the plug to remove the power cable from the socket
Failing to do so may damage the cord and lead to fire or electric shocks.
Turn the product OFF before performing maintenance
Failing to do so may cause electric shocks.
Regularly remove dust from the electric plug
The insulation on a dusty plug may fail when it is subject to elements such as humidity,
thus leading to fire or electric shocks.
● Remove the power cord and clean it with a dry cloth.
If the product shows any abnormality, immediately stop using it
If the product shows abnormalities such as smoke or an unusual smell, continuing to use it
may pose a fire hazard.
● Immediately remove the power cord and contact the retailer.
Do not attempt to repair or wire the product while it is turned ON
It may lead to fire or electric shock.
Do not pull on cables and other components
It may lead to fire or electric shock.
Do not damage the cables
Placing heavy objects on the cables or squeezing them in tight places will damage them,
which could cause fires or electric shocks.
Do not use near flammable gases
Doing so may lead to explosions and accidents or injuries.
Do not install the product where there is a risk of damage from seawater or
corrosive gases
This may cause the mounting unit to deteriorate, leading to accidents and injuries.
Do not install at places exposed to large amount of humidity and/or dust.
It may lead to fire or electric shock.
Do not place on unstable surfaces
Failing to do so may cause the product to fall leading to accidents and injuries.
10
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb 10 2022/04/27 13:19:20