Parts And Their Names - Panasonic WX-SE200DNP Mode D'emploi

Parts and their names

Front
1 2
1 P ower switch [POWER]
Turns the power ON/OFF.
2 P ower indicator (green)
Lights when the power is turned ON. Goes off when the power is turned OFF.
3 S tatus indicator [STATUS]
Indicates the status of communication with the extension receiver.
On (green): Normal
Blinking (green): Error (no receiver or unable to communicate with the receiver)
Off: Power is OFF.
4 R eception level indicator [RF LEVEL]
Shows the reception level of the microphone RF signal on each channel in five
increments. Installing the wireless antenna and selecting the antenna field in such a way
that the microphone always shows at least three green lines (level 3) within its usage
area will ensure stable operation.
On (5 green lines):
On (4 green lines):
On (3 green lines):
On (2 green lines):
On (1 green line):
On (1 to 5 red lines): Reception error
All off:
5 A udio level indicator / mute status indicator [AUDIO/MUTE]
Shows the audio level of the signal from the microphones on each channel.
On (red):
On (orange):
On (green):
Slow blinking (red): Muted (when this device is being controlled remotely)
Quick blinking (red): Volume adjustment knob cannot be operated (when this device
Off:
If the volume adjustment knob is operated in the external remote state, the volume
level indicator blinks quickly (red) and volume adjustment is not possible.
14
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb
3 4 5
6 8
Level 5 (Max.)
Level 4
Level 3
Level 2
Level 1 (Min.)
No paired microphone, or no signal from the paired microphone
Peak
Close to peak
Audio is being received
is being controlled remotely)
No audio
14
7
9
2022/04/27 13:19:20