How To Use; Operating Microphones - Panasonic WX-SE200DNP Mode D'emploi

How to use

■ Operating microphones

Follow the steps below to operate the product.
Power indicator
This product
Power switch
1
Turn ON this product and the receiver
Turn the [POWER] switch on the receiver with this product connected and the
[POWER] switch on this product to ON.
● The [POWER] indicators (green) on the extension receiver and this product light.
● The [STATUS] indicator on this product lights green.
2
Turn ON the microphone
Set the [POWER] switch on the microphone to ON.
● The [RF LEVEL] indicator of the channel to which the microphone is paired lights
on.
● The [AUDIO] indicator lights on when audio is input to the microphone.
3
Adjust the microphone volume
Adjust the volume adjustment knob.
32
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb
Reception
Audio level indicator
level indicator
Volume adjustment knob
32 2022/04/27 13:19:24