Brief Instructions For Cd And Documents Overview - ABB DCS800 Guide Rapide

Brief instructions for CD and documents overview

We appreciate that you purchased an ABB DC drive
power converter and thank you for the trust you put in our
products.
This brochure was put together to make sure that you continue
to be satisfied with our product. It is intended to provide you
with a brief overview of the product's key data, EMC notes,
typical applications, start-up and trouble-shooting.
If you need more information about the product you are
provided with a CD-ROM in addition to this brief documen-
tation. The CD-ROM is part of this document and features
the following contents:
Documentation
Our documentation is basically structured according to the
following system:
Technical catalogue (3ADW00019)
as comprehensive information to engineer complete DC
drive systems.
Hardware manual (3ADW000194)
as detailed information, with all important particulars about
the individual components, like module dimensions, electronic
boards, fans and auxiliary components.
Information for mechanical and electrical installation are
also included.
Firmware Manual (3ADW000193)
detailed information with all important issues about firmware
and setting of parameters. The manual includes information
for start-up and maintenance of the entire drive, in detailed
form.
This manual also includes Fault and Alarm codes and infor-
mation for trouble shooting.
Service Manual (3ADW000195)
for maintenance and repair of the converters.
Applications
DCS800 DC Drive can include application software e.g.
cranes, winders. In such case following procedures and
assistants can be blocked or not completed. Please check
for further documentation and manuals (check parameter
4.03, 83.01).
Additional information about applications (e.g. 1-pulse)
and technical accessories (e.g. Hardware extension or
Field bus interfaces) are handled by separate manuals. See
table DCS800 Drive manuals.
System requirements to use the CD-ROM
• Operating system WIN-
DOWS 000, XP
• ACROBAT READER 4.0 is
sufficient (we recommend
8.0 - included on the CD-
ROM)
In case the CD ROM does not start automatically please
double-click on Setup.exe.
Further support
In addition we offer further support, since we can only be
satisfied when you, as our customer, are satisfied with us
and our products.
Internet
On the ABB homepage under
www.abb.com/dc
you'll find abundant information for
• DC products
• service support
• the latest updates
• tools
• downloads, etc.
Please don't hesitate to visit us.
Contacts
If you require any further information, please contact your
nearest ABB Drives office or send an email to:
DC-Drives@de.abb.com
Please give us your name, your company address and
phone number. We immediately put you in contact with our
specialist.
3ADW000191R0500 DCS800 Quick guide edisf e
7