Hendi 281376 Mode D'emploi page 9

Multi stage cooking
This function can be used during manual entry or
programming. The maximum number of stages is
3. To use this function first follow the steps under
'Manual entry'. After setting the time and power of
the first stage press '
'STAGE-2', now input the desired time and power. If
a third stage is needed, press '
display will show 'STAGE-3', and input the desired
time and power. Now press the 'start' button to start
the microwave. Multi stage input is set in a same
manner while in programming mode. Bellow an ex-
ample of how this could work:
1) Open the door and press and hold "1" on the
number keyboard for 4 ~ 6 seconds, display will
show 'PROGRAM.
2) Press number button '3', display shows P:03. Af-
ter 2 seconds the display will show the time relat-
ed with the program (standard ':30').
3) Press the number buttons '1' '2' '5' to set the
How to program with the USB card and computer
Insert the USB card into computer and open the file called "Setup".
Double-click "MenuEdit" to enter editable interface. (Recommendation: Right-click and choose 'Run as
administrator')
All manuals and user guides at all-guides.com
' again, the display shows
' once more, the
cooking time.
4) Press power , and choose 7 on the number
keyboard for power level 70%. The display will
show '1:25 70'."
5) To set the second stage press '
ton 2- time entry button., the display will show
'STAGE-2'.
6) Press the number buttons '3' '3' '0' to input the
time.
7) Press , and choose 5 on the number keyboard
for power level 50%. The display will show '3:30
50'.
8) Press the 'u' for button 5. The multi stage pro-
gram is now saved under number keyboard '3'.
Note: Total cooking time is limited to 60 minutes
only.
Note: When multi stage cooking is active the micro-
wave shows the total time remaining of all stages.
' for but-
EN
9