Sentiotec PRO D DMX Instructions Pour L'installation Et L'utilisation page 7

Instructions for use for the user
5.2. Activating the lighting control unit
1. Press the ON/OFF switch 2, to activate the lighting control unit.
► The last settings are activated.
5.3. Operating the functions
● Light group selection 1
► To activate light group 1, 2 or 1+2: briefly press the button 1
► The selected light group is displayed in the display 7
● Brightness +/- 3
► Can be dimmed over seven levels
► The selected level is displayed in the display 6
● Colour changer 4
► To activate the colour changer: briefly press the button 4
► All colours in the display 6 light up for three seconds
► Speed of the colour changer: press and hold the button 4
► The selected speed is displayed in the display 6
► To change the speed (1-7): briefly press the button 4
● Colour selection 5
► To activate the colour: briefly press the button
► The selected colour flashes in the display 6
► To change the colour: briefly press the button 5
p. 7/8
EN EN
DE
FR
IT
NL