Product Description; Scope Of Delivery; Optional Accessories; Product Features - Sentiotec PRO D DMX Instructions Pour L'installation Et L'utilisation

Instructions for installation and use

3. Product description

3.1. Scope of delivery

● ProD DMX colour light control
● Connection cable 5m (1-046-851)
● Assembly instructions

3.2. Optional accessories

● DMX driver CC (1-046-759)
● DMX driver CV (1-046-758)
● LED tubes RGBW (LED-TB-xx)
● LED spots RGBW (LED-SP-RGBW-xx)
● Power supply units LED-PWS-xx/LED-150

3.3. Product features

The PROD DMX colour light control has the following functions:
● Two colour light groups which can be operated independently or together
● Seven levels for adjusting the colour
● Seven colours to choose from: white, purple, blue, turquoise, green, yellow, red
● Colour changer which can be adjusted to seven speeds

4. Installation and connection

The PROD DMX lighting control unit can be mounted inside the sauna if the fol-
lowing points are observed:
● Install the device as far away from the sauna heater, infrared lamps or other
heat sources as possible.
● Do NOT install the device on or right next to the sauna heater or other
heat source.
● The maximum installation height in a sauna cabin is 140 cm.
● The maximum installation height in an infrared cabin is 170 cm.
● No insulating material (such as mineral wool) may be located behind the device.
● Observe the ambient conditions (see 8. Technical data on page 8)
p. 3/8
EN EN
DE
FR
IT
NL