Aux In Socket - SOUNDMASTER SCD1990SW Manuel

Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the "STOP" button.
2. Press the "AMS / MODE" button. "P_01" will start to flash..
P_01 means the storage space
Use the "SKIP+ / TUNING+" & "SKIP- / TUNING-" buttons to select the desired track and
then press the "AMS / MODE" button again.
The display "P_01" will be changed to "P_02".
3. Select the next track with the "SKIP+ / TUNING+" & "SKIP- / TUNING-" buttons and press
the "AMS / MODE" button again. Repeat the procedure until all the desired tracks are
selected.
NOTE:
Once the storage capacity of the tracks to be programmed has been reached "PROGFULL"
will show in the display.
4. Press the "ENTER / PLAY / PAUSE / CLOCK" button. The playback starts.
The upper-left of the display will show "MEM".
5. Press once the button to stop the playback while retaining the program.
6. To play the programmed back again, press the "ENTER / PLAY / PAUSE / CLOCK" button.
7. To delete the program, press the "STOP" button twice. The notification "MEM" will
disappear.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in MP3 format. The device also
supports all standard CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 99 track scan be compressed and stored on
these CDs. Your machine detects an MP3 CD automatically (the total number of tracks and
MP3s appears in the display). If you would like to play one of these CDs, proceed as described
under "Playing CDs/MP3". Tracks can be programmed as described under "Playing Back
Programmed Tracks".
Headphone socket
To listen to music privately, use headphones with a 3.5 stereo jack plug and connect to the
headphones socket on the back of the system. The speakers will then be muted.
Via this socket you can also hear the sound of other playback devices such as MP3 players, CD
players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo jack plug to the AUX-IN socket.
2. Repeatedly press the "STANDBY / FUNCTION" button, until "Aux" is shown in the display.
3. You will hear the sound playback from the external device through the loudspeakers. You
may adjust the volume with "VOLUME- / ALARM 1" or "VOLUME+ / ALARM 2" buttons. The
CD buttons are not functional.
4. For the remaining procedure please see the operating instructions of the external sound
source.
NOTE:
Adjust the volume of the external device to a comfortable level.

AUX IN SOCKET

8
SCD1990SW / English Instruction Manual