Using The Breast Pump When You Have Symptoms Of Engorgement - Philips AVENT SCF394 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5. The display shows the
running time.
9. Briefly press the on/
off button if you want
to pause. To continue,
briefly press the on/off
button again.
Tip: For optimal expression, choose the highest setting that still feels comfortable. This setting may differ
across different sessions.
Tip: You can use the double breast pump as a single breast pump by connecting only the tube of one
pump kit to the motor unit.  
Using the breast pump when you have symptoms
of engorgement
Breast engorgement means your breasts are overfilled with milk. This is a painful and unpleasant condition.
Frequent extraction of milk and completely emptying the breasts of milk can reduce engorgement. When
you have symptoms of engorgement, make sure you use a lower vacuum level to minimize stretching of
breast tissue.
Note: When symptoms of engorgement are present, make sure you empty your breasts completely
during each expression session.
6. Use the 'level up' and
'level down' buttons to
change the suction level
to your preference.
3 sec.
10. Press and hold the
on/off button to switch
off.
7. After 90 seconds the
breast pump will switch
smoothly to expression
mode and slowly increase
its vacuum to the last
used expression suction
level (or level 11 when
used for the first time).
11. Unplug the adapter
from the wall socket and
pull the small plug out of
the motor unit.
English
8. If your milk starts
flowing earlier or if you
want to switch from
expression to stimulation
mode, you can switch
modes with the mode
selection button.
17

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Avent scf392

Table des Matières