Philips AVENT SCF394 Mode D'emploi page 14

English
14
4A. Push the inner part
of the cushion into
the funnel against the
line (indicated with an
arrow).
7. Connect the tube(s) to
the motor unit.
Note: You can place
the cover over the
cushion to keep the
breast pump clean when
you take it with you and
while you are preparing
for expressing.
5. Place the silicone
diaphragm in the pump
body.
3 sec.
8A. When the breast
pump is charged, you
can use it cordless. Press
and hold the on/off
button until the device
switches on.
5A. Make sure that the
silicone diaphragm fits
securely around the rim
by pressing it down with
your thumbs.
8B. You can also use the
breast pump connected
to the wall socket. If the
battery is low, insert the
adapter into the wall
socket and insert the
small plug at the other
end into the motor unit.
6. Attach the silicone
tube and cap onto the
silicone diaphragm.
Push down the cap until
it is securely in place.
9. The breast pump is
now ready for use.