Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and
disposal.
Before carrying out any procedure on the machine, the operators and qualified technicians must read this Manual carefully.
Contact Nilfisk-Advance in case of doubts regarding the interpretation of the instructions and for any further information.
TARGET
This Manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not carry out procedures reserved for qualified technicians. Nilfisk-Advance will not be answerable for
damages coming from the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can
cause damage to it.
DECLARATION OF CONFORMITY
The Declaration of Conformity, supplied with the machine, certifies the machine conformity with the law in force.
NOTE
Two copies of the original EC Declaration of Conformity are provided together with the machine
documentation.
IDENTIFICATION DATA
The machine model and serial number are marked on the plate (31).
The machine model year is written in the EC Declaration of Conformity and it is also indicated by the first two figures of the
machine serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification
data.
MACHINE model ..............................................................
MACHINE serial number ..................................................
2
All manuals and user guides at all-guides.com
909 6754 000(2)2006-10 A
Publicité
Chapitres
Dépannage
