Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SERVICE
· Only qualified specialist personnel and original replacement parts should be used for
repairs. This will ensure that your device remains safe.
STORAGE
· Thoroughly clean the whole machine and its accessories.
· Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
· Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
· Don't keep it in plastic bags to avoid humidity build-up.
GUARANTEE
Refer to the enclosed guarantee conditions for the terms and conditions of guarantee.
After sales service
· All repairs must be referred to authorised personnel!
· See your local dealer.
· Any tampering with the appliance will invalidate the warranty.
· Repairs carried out improperly and by unqualified persons may have serious
consequences for the user!
· In the interests of further development, the appliance may be subject to
constructional or design changes without prior notice.
55
All manuals and user guides at all-guides.com
Quick User Guide
Pertol hedge trimmer
This quick guide is for experienced users of this product only,
Please read the details in manual for first time using, The
following guides are with explanation pictures at the backside of
this card:
1. Add fuel: always run this product with fuel, which is mixed with
2-stroke oil with
ratio
30:1. (Fig.1)
2. Set ignition switch to the "I" position (ON position). (Fig.2)
3. Press priming bulb several times until fuel is visible and flows freely
in the clear fuel tank return line. (Fig.3)
4. Set the choke lever to the "Cold start"(closed) position.(Fig.5)
5. Pull recoil starter briskly, when you hear the engine seems to start,
return choke lever to "I" position (ON position), then pull recoil
starter briskly again until the engine runs. (Fig.6 Fig.7)
6. After starting engine, press throttle trigger to release throttle lock,
then allow engine run several minutes to warm up. (Fig.8)
7. After engine warm-up, press throttle trigger gradually to get
operating speed.
8. To stop the product: release throttle trigger first, then set ignition
switch to the "Stop" position, In case of emergency, directly set
ignition switch to the "Stop" position.(Fig.9)
56
Publicité
Table des Matières
