Machine Data; Intended Use - Elem Garden Technic THT26RH-AV Traduction Des Instructions Originales

1.MACHINE DATA

Technical specifications
Type of engine Air cooled,2-stroke,
Single cylinder,gasoline engine
Engine power 0.75kW/7500 min-1
Idle speed 2800-3200/min
Speed engine max 10000 min-1
Displacement 26cm³
Bore 34.0mm(1.34'')
Stroke 28.0mm(1.10'')
Exhaust system Muffler
Carburetor Ruixing
Ignition system Flywheel magneto,
capacitor discharge ignition
Fuel Mixed fuel, gasoline and oil, 30:1
Gasoline 95/98 Octane unleaded *
Oil Universal 2-stroke engine oil
Fuel tank capacity 0.6 L
Starter system Automatic recoil starter
Clutch Centrifugal type
Gear case ratio 57:10
Cutter Double reciprocating blade,
double edge
Blade length 560 mm
Teeth pitch 28 mm
Max. cutting diameter 10 mm (soft wood)
Weight 5,5/5,8 kg
Sound pressure level LpA 95.1dB (A) K=3dB(A)
Sound power level LwA 104.6dB (A) K=3dB(A)
Guarantee LwA 107 dB (A)
Vibration emission value ah
2
- front handle: 4.764m/s² K = 1.5m/s
2
- rear handle: 4.956m/s² K = 1.5m/s
The declared vibration total value has been measured in accordance
with a standard test method and may be used for comparing one tool with
another that the declared vibration total value may also be used in a preliminary
assessment of exposure.
37
All manuals and user guides at all-guides.com
A warning that the vibration emission during actual use of the power
tool can differ from the declared total value depending on the ways in which the
tool is used and of the need to identify safety measures to protect the operator
that are based on an estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to the trigger time).

INTENDED USE

Cutting and trimming of hedges, bushes and ornamental shrubs in the domestic sector
only. All other uses are expressly excluded.
Tools for private and hobby gardens are not suitable for use in public facilities, parks
and sport centers, along roadways, on farms or in the forestry sector.
Package contents
After opening the carton, check for damage. Immediately notify your retailer or the
address on the warranty card of damaged or missing parts. Use the contents list to
check for missing parts:
1 Hedge trimmer
1 T-Wrench 17 x 19
1 Spanner S8-S10
1 Fuel-oil mixing bottle
1 Instruction manual
Description
Fig. 1
There are the safety decals on your hedge trimmer. Make sure the decals are legible
and that you understand and follow the instructions on them.
1. Front handle guard
Comfortable, textured finish provides anti-slip grip for front hand. Guard protects hand
from the blades. Warning decals are located on guard.
2. Blades
Double reciprocating blades mounted to a blade support bar. The blades are double
sided, capable of cutting on either side.
3. Blade stiffener
Attaches to top of blades and guides material being cut into blades.
4. Spark plug
Provides spark to ignite fuel mixture.
38