Bartscher 200272 Mode D'emploi page 37

Combination of buttons
To activate or deactivate some of the functions you may need to press more than one
button at the same time.
Block or unblock the buttons:
+
- to block, press both buttons and hold longer than 3 seconds, until
-
+
Switch to programming mode:
-
+
Return to a previous indication:
-
LED indicators
LED indicators on the digital display indicate the active function:
LED
you see "OFF" on the display;
to unblock, press both buttons and hold longer than 3 seconds,
until you see "ON" on the display.
press both buttons and hold for 3 seconds, LED
and you can start programming.
press both buttons to leave the programming mode and return to a
previous displayed value (temperature inside of the device).
Display
illuminates
flashes
illuminates
flashes
illuminates
flashes
illuminates
flashes
Meaning
compressor active
delayed
defrost in progess
defrost delayed
indicates temperature standard
in programming mode
indicates temperature standard
in programming mode
or flashes,
- 35 -