Technical Features; Instructions For Packaging, Transport And Storage - Tecno-gaz NEGATIVOSCOPIO Mode D'emploi

PAR. 04
LENGTH
CASING MATERIAL
LOWER PLANE MATERIAL
SUPPLY VOLTAGE
FREQUENCY
FUSE CURRENT
TYPE OF PROTECTION
FEEDING CABLE
CONNECTOR
PAR. 05

INSTRUCTIONS FOR PACKAGING, TRANSPORT AND STORAGE

The equipment has a light weight and moderate volume, so it does not need any special
package.
It is protected by a cellophane bag, then wrapped up in a polystyrene foam, placed into a
corrugated cardboard box and sealed with adhesive tape.
Do not shake or bump the package during transport and do not expose it to moisture.
WARNING
Do not throw the packaging material into the environment, recover recyclable materials
and give the residues for disposal to a specialised firm.
The packaged products shall be stored in dry places at a temperature between -10°c and
+40°C.
DO NOT STACK MORE THAN 5 UNITS ON EACH OTHER.

TECHNICAL FEATURES

MECHANICAL FEATURES
WIDTH
HEIGHT
WEIGHT
ELECTRICAL FEATURES
PHASES
AISI 304 STAINLESS STEEL
220-230 V AC
1 + NEUTRAL
L=2m, 2x1 sqmm+earthing
10÷16A+earthing
14
460 mm
55÷95 mm
380 mm
4 kg
ABS
50 HZ
1 A
PE
DNEF001 –Rev. 4