Kohler K-1714 Guide D'installation page 6

Field Wiring
Service Box
Green LED
Diagnostic Light
Control
Cable Input
10-1/4"
(26 cm)
3/4"
(1.9 cm)
3. Determine the Location of the Steam Generators
IMPORTANT! The minimum required access panel is 24" (61 cm) L x 15" (38.1 cm) H. Allow for a
minimum 12" (30.5 cm) space around all sides of the steam generators.
Ensure clearance between the steam lines and any surrounding surfaces.
Allow for access to the steam generators after installation.
Allow for a 12" (30.5 cm) air gap between and on all sides of the generators.
Allow for a drain pan.
For optimum performance, install the steam generators below the level of the steam heads and as
close as possible to the steam heads. The steam generators should be installed within 25 ft (7.62 m)
of the steam heads in a dry, well-ventilated area. They should be installed within 12" (30.5 cm) of
each other.
4. Install the Electrical Supplies
Model
Ordering Information
Steam Generator Rating
Required Electrical Service
Dedicated Circuit Breaker #1
Dedicated Circuit Breaker #2
Product Information
Weight
Size
Electrical Rating
1059059-2-E
17-5/8" (44.8 cm)
19-11/16" (50 cm)
Inside surface of Drain/Spill Pan
K-1714-NA
18 kW (2-9 kW)
240 V, 60 A, 50/60 Hz
240 V, 60 A, 50/60 Hz
42 lbs (19 kg), 21 lbs (9.5 kg ) each
18" (45.7 cm) L x 24" (61 cm) x 13" (33 cm)
240 V, 45 A, 50/60 Hz
3/8" NPT Water In
Minimum required access panel is
24" (61 cm) L x 15" (38.1 cm) H.
Allow for a minimum of 12" (30.5 cm) of
space around all sides of the steam generator.
Allow for 3/4" (1.9 cm) space between the
generator and the Drain/Spill Pan.
3/4" NPT
Pressure Relief
1/2" NPT
Steam Outlet
12-1/2"
(31.8 cm)
6
3/8" NPT Drain
6-1/8" (15.6 cm)
K-1715-NA
22 kW (2-11 kW)
240 V, 60 A, 50/60 Hz
240 V, 60 A, 50/60 Hz
240 V, 46 A, 50/60 Hz
Kohler Co.