Install Appliance - Gaggenau VG491211CA Notice De Montage

6.
Connect the longer cable to the control cable for
connection to the appliance. The plug must snap into
the socket (F).
Note: The appliance can be connected to any control
knob.
7.
After installing, check that all plug connections fit
correctly.
8.
After installing all the cables, secure them to the
retaining plate by bending the tab down (E).
All manuals and user guides at all-guides.com

Install Appliance

9
1.
2.
Installation Procedure
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
Connect the connection cable to the control cable in
the socket on the bottom of the appliance. The plug
must snap into place.
Insert appliance evenly into the cutout. Push it down
firmly into the cutout.
Note: The appliance must be firmly fixed in the cutout
and must not be able to move around (e.g., during
cleaning). If the width of the cutout is at the upper
tolerance limit, fasten the ledges at the sides in the
cutout if necessary.
en-us
11