Charging The Rechargeable Battery - AL-KO solo HT 4260 Mode D'emploi

Start-up
■
Remove the rechargeable battery from the
appliance and push the protective cover over
the cutting blade for:
■
Testing, adjustment work and cleaning
work
■
Working on the cutting blade
■
Leaving the appliance
■
Transport
■
Storage
■
Maintenance and repair work
■
Danger
4 START-UP
4.1

Charging the rechargeable battery

CAUTION!
Danger of fire during charging!
Due to heating of the charger, there is a
danger of fire if it is placed on an inflam-
mable surface and is not adequately
ventilated.
■
Always use the charger on a non-in-
flammable surface or in a non-com-
bustible environment.
■
If available: Keep the ventilation
slots free.
NOTE
The rechargeable battery and the
charging unit are not included.
NOTE
Fully charge the rechargeable battery
before using it for the first time. The re-
chargeable battery can be charged in
any charge status. Interrupting charging
does not damage the rechargeable bat-
tery.
NOTE
When charging, the rechargeable bat-
tery is protected from overcharging due
to automatic detection of the charge sta-
tus and thus can remain connected to
the charging unit for some time, but not
permanently.
1. Connect the rechargeable battery (01/6) and
charging unit (01/7), as well as the charging
unit to the mains voltage. The charging pro-
cess begins. The LED on the charging unit
442203_b
lights green, the charge status is displayed
on the rechargeable battery.
2. Observe the charge status displays on the re-
chargeable battery. The charging process
takes approx. 2.5 hours until fully charged.
The charging process ends automatically
when the rechargeable battery is fully
charged.
3. Disconnect the rechargeable battery from the
charging unit and the charging unit from the
mains voltage.
5 OPERATION
WARNING!
Risk of injury due to detaching appli-
ance parts
Appliance parts detaching during opera-
tion can lead to serious injury.
■
Before turning the appliance on,
check that all the parts of the appli-
ance are firmly tightened.
■
Attach cutting tools so that they can-
not detach during operation.
5.1 Connecting the rechargeable battery
belt system (02) to (05)
Connect the rechargeable battery belt system ac-
cording to the illustration (02) to (05).
5.2 Inserting the rechargeable battery (06)
Inserting the battery
1. Push in (06/a) the rechargeable battery
(06/1) into the rechargeable battery belt sys-
tem (06/2) until it locks.
Pull out the rechargeable battery
1. Press and hold the unlock button (06/3) on
the rechargeable battery (06/1).
2. Pull out (06/b) rechargeable battery (06/1).
5.3 Establishing the voltage supply (07, 08)
Mounting the connecting cable
1. Align the first connector of the connecting ca-
bles (07/1) to the guiding pin and guide slot
of the rechargeable battery belt system con-
nector (07/2), join, and turn slightly clockwise
until the locking and unlocking switch (07/3)
audibly engages.
2. Align the second connector of the connecting
cables (08/1) to the guiding pin and guide slot
of the connection socket, push (08/a) into the
connection socket of the appliance (08/2),
29