Installing The Burner Grates; Power Failure; Registering Your Bsh Product - Thermador Professional Serie Mode D'emploi

Installing the burner grates

1. Place grates flat-side down and align into the
rangetop recess.
2. Grates should rest flush against each other and
against the sides of the recess.
IMPORTANT
• The appliance occasionally has an odor or smoke
when first used. These odors or smoke comes from
the burning off of manufacturing residues and is
typical of any new appliance regardless of
manufacturer.
• Please note that some pets or humans can be sensitive
to the odors created during any high heat cooking
whether it is a manufacturing residue burn off or food
so it is recommended that those potentially affected
be removed from the kitchen area.
• For proper combustion do not use the rangetop
without the burner grates in place.
• There is a slight sound associated with gas
combustion and ignition. This is a normal condition.

Power failure

9 WARNING
In the event of a power failure, turn all knobs to the OFF
position. Only the standard burners can be lit manually.
Refer to IN CASE OF AN ELECTRICAL FAILURE
instructions listed in the IMPORTANT SAFETY
INSTRUCTIONS on page 5.

Registering your BSH product

Register your BSH product to access to your product
related information. For product registration information
see "Before calling for service."
9