Safety Information - HBM MP85A FASTpress Guide Rapide

4

Safety information

Observe the safety information described in the twin-channel amplifier,
module MP85A(DP) FASTpress, MP85A(DP)-S EASYswitch operating in-
structions.
This Quick Start Guide will enable you to rapidly and easily produce measure-
ment results with the MP85A(-S) or MP85ADP(-S). The designation MP85A
process controller will be used for all devices in this manual. If text/data refers
only to specific modules, this will be clearly indicated in the text and one of the
above designations used.
The MP85A process controller is set up with the "PME Assistant" setup soft-
ware, which is on the CD-ROM (PME System CD) that accompanies the de-
vice, or available as freeware from
http://www.hbm.de
Further, more detailed information is available in the:
− PME Assistant program Help with FAQs (PME Assistant must be installed)
− Twin-channel amplifier, module MP85A(DP) FASTpress, MP85A(DP)-S EA-
SYswitch operating instructions.
− MP85A(DP) FASTpress, MP85A(DP)-S EASYswitch CAN/PROFIBUS/
Ethernet interface description.
MP85A(DP) FASTpress, MP85A(DP)−S EASYswitch
> Support > Download > Software
A2073-5.0 en/de/fr