HBM MP85A FASTpress Guide Rapide page 11

MP85A(DP) FASTpress, MP85A(DP)−S EASYswitch
TIP
To ensure that the TEDS function is automatically available after a power fail-
ure and also during measurement itself, select the relevant options in the
TEDS window and save them in the current parameter set (window: Save/
load parameters)
Sensors without TEDS (electronic data sheet)
Should you be using sensors without TEDS, the relevant sensor data must be
entered via the PME Assistant.
This includes:
1. Transducer type
2. Transducer characteristic curve (2 points). Subsequently,
3. A zero balance must be performed.
A2073-5.0 en/de/fr
11