Operating State - HBM MP85A FASTpress Guide Rapide

24

Operating state:

LED1 (OK / NOK)
LED 1 (OK/NOK) / Process status
Initialization after device is switched on
Alarm
Process is started
Total result OK
Overall result NOK
LED2 (Status)
LED2 (Status) / Device status
Initialization after device is switched on
One of the following errors is present:
EEPROM error, initial calibration error, scal-
ing error, MMC/SD error or CAN bus error
Transducer error, ADC overflow or gross
overflow (one or both measurement chan-
nels)
LCD error
CAN bus: Transmit / receive data
Status "Pre-operational"
Status "Operational"
MP85ADP PROFIBUS status
Error state
BD_SEAR, WT_PARM, WT_CONF states
DATA_EX status
Control LEDs for the Ethernet status are located underneath the MP85A pro-
cess controller.
LED Ethernet status
Physical connection present
Transmit / receive data
100 MBit transmission speed
10 MBit transmission speed
MP85A(DP) FASTpress, MP85A(DP)−S EASYswitch
Red LED
x
x
x
Red LED
x
x
x
x
Red LED
x
Yellow Green
LED LED
x
x
Yellow Green
LED LED
x
x
x
Yellow Green
LED LED
x
x
Green LED
−
−
on
−
Flashing LED
x
x
Flashing LED
x
x
x
Flashing
LED
Yellow LED
on
flashing
−
on or flashing
A2073-5.0 en/de/fr