Ryobi OGS-1801 Manuel D'utilisation page 13

GB GB
F F D D E E
FEATURES
PRODUCT SPECIFICATIONS
Motor
Charge Rate
Weight
Blade Width
Battery pack (not included)
Charger (not included)
FEATURES
1. Rear handle
2. Trigger lock button
3. Trigger
4. Blades
5. Blade cover
6. Battery port
7. Latches
8. Battery pack (not included)
9. Blade screws
10. Blade slot
11. Gear post
OPERATION
TO INSTALL BATTERY PACK
Place the battery pack in the grass shear. Align raised
■
rib on battery pack with groove in grass shear
battery port. See Figure 2.
Make sure the latches on each side of the battery
■
pack snap in place and that battery pack is secured in
the grass shear before beginning operation.
TO REMOVE BATTERY PACK
Locate latches on side of battery pack and depress
■
both sides to release the battery pack from the grass
shear. See Figure 2.
Remove battery pack from the grass shear.
■
CAUTION
When placing battery pack in your grass shear,
be sure raised rib on battery pack aligns with
groove in grass shear battery port and latches
snap in place properly. Improper assembly of
battery pack can cause damage to internal
components.
I I P P NL NL S S DK DK
18 V
1 – 1 Hour
1/2
3 lbs. (767 g)
4 in. (102 mm)
BPP-181 M / BPP-1815M /
ACR-1800
BC-1800 / BC-1815S /
ABP-1801
N N FIN GR HU FIN GR HU CZ RU CZ RU
English
STARTING THE GRASS SHEAR
Press and hold the trigger lock button. See Figure 3.
■
This makes the trigger operational.
Release the trigger lock button and continue to
■
squeeze the trigger for extended operation.
STOPPING THE GRASS SHEAR
Release the trigger to stop the grass shear.
■
Upon release of the trigger, the trigger lock button will
■
be automatically reset to the lock position.
HOLDING THE GRASS SHEAR
Hold the unit by the rear handle with the blade
■
directed away from you. See Figure 4.
USING THE GRASS SHEAR
Use the grass shear for decorative trimming of grass
around trees, walkways, flower beds, etc.
With the blade parallel to the ground, start unit and
■
trim grass in a forward motion. See Figure 4.
OPERATING TIPS
Before starting your grass shear, hold the unit
■
with the cutting blades directed away from you.
Always use your grass shear properly.
Keep from trimming too close to dirt, sand or gravel.
■
This can cause the blades to dull, reducing the
cutting efficiency.
Do not force the unit through dense growth.
■
If the blades slow down, reduce your pace.
If blades do become jammed, stop the motor,
■
allow the blades to stop and remove the battery pack
before attempting to remove the obstruction.
8
RO PL SLO HR TR EST LT RO PL SLO HR TR EST LT
WARNING
Dress properly to reduce the risk of injury when
operating this unit. Do not wear loose clothing or
jewelry. Always wear eye protection when in use.
Wear heavy, long pants, boots and well fitting
gloves. Do not wear short pants, sandals or
go barefoot.
DANGER
If blade jams on any electrical cord or line,
DO NOT TOUCH THE BLADE! IT CAN
BECOME ELECTRICALLY LIVE AND VERY
DANGEROUS. Continue to hold the grass shear
by the insulated rear handle or lay it down and
away from you in a safe manner.
LV LV SK BG SK BG