Inserting and Removing Tips
Insert tip into the center of the Water Flosser handle. The
colored ring will be flush with the top of the handle if the
tip is correctly locked into place.
NO
Gap
Button
20018513-FAA_250E1_IM_rdF.indd 7
To remove tip from the handle
slide the tip eject button up
towards the top of the handle
and lift tip from handle.
Slide
Up
GETTING STARTED
Powering the Unit
Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Remove the reservoir and fill with lukewarm water.
Replace the reservoir over the base and press
down firmly.
Fill
Replace
7
O
I
2
1
3
12/10/13 10:16 AM