Télécharger Imprimer la page

Parkside PAFS 550 A1 Traduction Des Instructions D'origine page 20

Masquer les pouces Voir aussi pour PAFS 550 A1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
Troubleshooting
Fault
Possible cause
The inserted noz-
zle is clogged.
The paint
spray gun
The HEA filter
does not
is clogged.
spray.
The paint spray
gun is locked.
The appliance is
not plugged in.
The appliance
has overheated.
The motor
There is no volt-
is not
age on the mains
running.
socket.
The appliance has
been operated
and maintained
according to the
operating instruc-
tions, but still does
not work.
Disposal
Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
PAFS 550 A1
Remedy
Clean the nozzle
and use a suita-
ble HEA filter.
Clean or replace
the HEA filter.
Unlock the paint
spray gun.
components for disposal if necessary. The pack-
Insert the mains
aging material is labelled with abbreviations (a)
plug into an
and numbers (b) with the following meanings:
appropriate
1–7: plastics, 20–22: paper and cardboard,
mains socket.
80–98: composites.
Follow the instruc-
tions in the section
"Overheating pro-
tection".
Environmental compatibility and material
Check the mains
disposal
socket.
Contact our
Customer
Service depart-
ment.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
Paints and lacquers ... are considered
hazardous waste and must be disposed of
accordingly.
Observe the local regulations.
Observe the manufacturer's instructions.
Environmentally harmful chemicals must not be
allowed to get into the ground, groundwater or
any body of water.
Spraying work next to bodies of water or
adjoining surfaces thereof (catchment area) is
therefore not permitted.
When purchasing paints or lacquers ... pay
attention to their environmental compatibility.
GB │ IE
 15

Publicité

loading