Synchronized Disc Recording - JVC HX-GX7 Manuel D'instructions

3
Start playing the source—FM, AM, CD player, or
auxiliary equipment connected to AUX jacks.
• When recording a disc, you can also use "Synchronized
Disc Recording" (see below).
4
Start recording.
1
sec.
To stop recording
1
sec.

Synchronized Disc Recording

You can start and stop both disc play and tape recording at
the same time.
1
Load a disc and insert a recordable cassette.
2
Select a disc.
DISC 1 DISC 2
PLAY
EJECT
• When you record an MP3 disc, you can select a track to
start recording with (see "To select a track to start
playback (MP3 only)" on page 10).
For recording desired tracks on discs:
You can program tracks to record from plural discs
with your preferred order.
• Select Program Play (and make a program (see
page 15)) without starting playback.
Main Unit
ONLY
DISC 3 DISC 4 DISC 5
/BEEP
3
Change the Reverse mode if necessary (see page 18).
4
Start recording.
DISC REC
START
• When either CD play or recording ends, both CD player
and the cassette deck stop at the same time.
To stop recording
REC
START
/STOP
or
/BEEP
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
19