C Onnecting To A Hob; Setting Up A Connection - Gaggenau AW 2 Séries Notice D'utilisation Et De Montage

Connecting to a hob
en

C onnecting to a hob

e
You can connect this appliance to a hob (if the hob supports
C o n n e c t i n g t o a h o b .
connection to the appliance) and then control the functions of
the hood via your hob.
Appliances can be connected to each other in different ways:
Home Connect
Two appliances can be connected using the Home Connect
app provided that both of them are Home Connect compatible.
Refer to the Home Connect documents supplied for more
information.
Connecting appliances directly
If the appliance is connected directly to a hob, it cannot be
connected to your home network as well. The appliance will
function as an extractor hood that is not connected to the
network and you can continue to operate it via the control
panel.
Connecting appliances via your home network
If the appliances are connected to each other via your home
network, both the hood controls on the hob and Home
Connect can be used to operate the appliance.
Notes
– Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that these
are complied with even when operating the appliance via
the hood controls on the hob.
– If the extractor hood is being operated by means of the
controls on the hood itself, this mode of operation always
has priority. It is not possible to use the hood controls on
the hob during this time.

Setting up a connection

The hood must be switched off before you can connect the
hob and extractor hood.
Connecting directly
Make sure that the hob is switched on and is in search mode.
To do this, refer to the section entitled "Connecting to the
extractor hood" in the instruction manual for your hob.
Notes
– Before connecting the appliance, reset all existing
connections to the WiFi or other appliances.
– If your extractor hood is connected directly to the hob, it
cannot be connected to your WiFi as well and you will not
be able to use Home Connect.
·
·
Connecting via your home network
Follow the instructions in the section entitled "Automatic login
to your home network" or "Manually logging into your home
network" ~
Home Connect
Once the extractor hood is connected to your home network,
you can connect to the hob via the Home Connect app. To do
this. follow the instructions on your mobile device.