Aim TTi MX100Q Instructions page 47

Masquer les pouces Voir aussi pour MX100Q:
Table des Matières

Publicité

Front Panel Locking:
INTERFACES (MX100QP only)
Full digital remote control facilities are available through the USB, RS232, LAN and GPIB interfaces.
Setting and readback resolutions are the same as for the Output and Meter specifications
respectively.
RS232:
USB:
LAN:
GPIB (optional):
Remote Command
Processing Time:
GENERAL
AC Input:
Power Consumption:
Operating Range:
Storage Range:
Environmental:
Safety:
EMC:
Size:
Weight:
Options:
The lock key can be used to disable front panel control (hold to unlock).
If required locking can alternatively be done using a secure passcode.
Standard 9-pin D-connector. Baud rate 9600.
Standard USB 2.0 hardware connection.
Ethernet 100/10base-T hardware connection. 1.4 LXI Core 2011.
Conforms with IEEE488.1 and IEEE488.2.
Typically <120ms (80ms min, 160ms max) between receiving the
command terminator for a step voltage change at the instrument and
the output voltage beginning to change.
110V – 240V AC ± 10%, 50/60Hz.
Installation Category II.
650VA max.
+5ºC to +40ºC, 20% to 80% RH.
−40ºC to + 70ºC.
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Complies with EN61010-1.
Complies with EN61326.
320 x 130 x 375mm (WxHxD) x 3U height.
7.3kg (MX100Q) 7.5 kg (MX100QP)
19-inch rack kit.
Page 46

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mx100qp

Table des Matières